Skip to main content
The Prompt Lab is where you perfect an AI prompt before using it in bulk. Load a real product, write or tweak a prompt, and see the generated content side by side with the original. Nothing changes in your catalog until you choose to apply it, so you can experiment freely. Where to find it: in the top navigation, open AI & Automation and choose Prompt Lab, or open your avatar menu and choose Prompt Lab.
Use the Prompt Lab to get a prompt right once. Then save it to your library and reuse it across hundreds of products with consistent results. Each test, and each time you apply a result to the product, uses 1 credit.
WISEPIM Prompt Lab for testing and tuning AI enrichment prompts WISEPIM Prompt Lab for testing and tuning AI enrichment prompts

The layout

The Prompt Lab has three panels:

Test your first prompt

1

Load a product

Click Load product and search for a product by SKU. The product appears in the left panel. From a product’s FAQs tab, Tune the FAQ prompt opens the Prompt Lab with that product already loaded.
Pick a product that already has a description. That gives you a clear before-and-after comparison.
2

Adjust the settings

Under What do you want to generate?, pick the field to test, then set the industry, purpose, tone, and point of view. See Configuration options below.
3

Write or review the prompt

Start from the default prompt template, or write your own. Use variables like {{title}} to pull in real product data.
4

Test the prompt

Click Test (or press Cmd/Ctrl + Enter). The generated content appears in the right panel in 30 to 60 seconds.
5

Compare and iterate

Check the result against the original. Change one setting, test again, and keep what works.
WISEPIM Prompt Lab testing a prompt on a real product with original and AI output side by side WISEPIM Prompt Lab testing a prompt on a real product with original and AI output side by side

Configuration options

The bottom panel controls how the AI writes. Set these before you test.

What do you want to generate?

Pick one field to test. Each mode works on its own.

Industry

The industry tells the AI your market context, so it uses the right terminology and focuses on relevant features. Options include All Industries, Fashion and Apparel, Electronics, Home and Garden, Health and Beauty, Sports and Outdoors, Automotive, and more.
Prompt Lab load product interface showing product search and loading

Purpose

Tone of voice

Point of view

Advanced options

Turn on Include Specification Table to add a structured table of technical details. This works well for electronics, appliances, and other spec-heavy products.

FAQs in the Prompt Lab

Pick FAQs under What do you want to generate? to write and test an FAQ prompt on the loaded product.
1

Choose what the FAQs cover

Under What should the FAQs cover?, tick the FAQ types, such as compatibility, care or what is in the box. The types recommended for your industry are preselected. Reset to recommended brings them back.
2

Set the number of questions

Set Questions to Up to N, from 1 to 20. A type the product data cannot answer is skipped rather than guessed, so a run can return fewer.
3

Ground the answers

Leave Use web research on to base the answers on the product’s latest web research. Without research, answers use the product data only. Set the Point of view if you want.
4

Test and read the result

The result shows the questions as shoppers will see them, with Coverage per type listing which types were answered and which were skipped. Switch the Layout between Accordion, List and Headings, or view the storefront HTML and use Copy HTML.
5

Apply to the product

Under How to apply, choose Add to keep the product’s FAQs and add these (questions it already has are skipped), or Replace to swap the product’s own FAQs for these. Category FAQs are never touched.
Save the prompt to use it in bulk: in the Enrich modal, choose FAQs and pick it under Prompt. See Product FAQs.

Write effective prompts

A good prompt is specific. Tell the AI exactly what to create, how long it should be, and in what style. Add context about your brand and an example of the output you want.

Using variables

Variables pull real product data into your prompt at test time. Wrap each one in double braces. The Prompt Lab’s test run substitutes these bare variables from the loaded product:
Bare variables like {{title}} are a Prompt Lab feature for test runs. The scoped variables you see elsewhere, such as {{product.name}}, {{brand.tagline}} and the rest of the Content Logic catalog, are resolved when a saved prompt runs in a real enrichment, not by the Lab’s Test button. A scoped variable left in a test prompt shows a warning chip and passes through unresolved, so judge scoped-variable prompts by an enrichment run on a single product rather than by a Lab test.
Example prompt:

Prompt tips

  • Be specific. Define the length, format, and style you want.
  • Add structure. Use numbered steps or bullet points for multiple requirements.
  • Give context. Mention your brand voice and target audience.
  • Start simple. Begin with a basic prompt, then add detail as you test.
For brand-consistent results, complete your Knowledge Library first. The AI uses it to match your brand voice automatically.
Prompt Lab interface showing prompt writing and testing workflow

Save and reuse prompts

Once a prompt works well, save it so you never rewrite it.

Save a prompt

1

Test until it works

Confirm the prompt gives good results across a few different products.
2

Open the save dialog

Click Save Prompt (or press Cmd/Ctrl + S).
3

Add details

Give it a clear name, a description, and tags. Set the industry and purpose so you can find it later.
4

Save

Your prompt is stored in the Prompt Library for reuse.

Load an existing prompt

Click Library, browse your saved prompts, and select one. All settings and prompt text load automatically, ready to test or modify.
Name prompts descriptively, like “Electronics SEO Description”. Add a version number when you make a major change.
Prompt Lab showing load prompt interface with prompt configuration options

From lab to bulk

Once a prompt is proven, use it to enrich your whole catalog.
1

Test across product types

Run the prompt on a few representative products from each category, including ones with minimal data.
2

Save the winners

Store the prompts that perform best in your library.
3

Run in bulk

Select a saved prompt in a bulk enrichment operation to apply it across many products at once.
Prompt Lab load prompt modal showing available prompts from library

Troubleshooting

Check the SKU for typos or extra spaces, and confirm the product exists in your current project. Try a different SKU to test the search.
Add more specific instructions to your prompt, name the unique selling points to highlight, and adjust the industry and purpose settings.
Complete your Knowledge Library for better brand context. Add tone examples and brand-specific terms to your prompt, and adjust the tone setting.
State the length you want in the prompt, using a word count or a number of paragraphs.
AI generation usually takes 30 to 60 seconds, and complex prompts take longer. If there’s no response after 2 to 3 minutes or the test keeps timing out, contact support.

Prompt Library

Organize, reuse, and share your saved prompts.

Enriching Products with AI

Apply your tested prompts to products in bulk.

Knowledge Library

Give the AI your brand voice for on-brand results.

AI Chat

Generate and refine content in a conversation.